Other Modes; Function Keys - Siemens FIREFINDER-XLS PMI Operation Manual

4

FUNCTION KEYS

LOGOUT
If Functions keys have been programmed in the Zeus tool, they can be accessed in
the Menu mode by pressing the Function soft key. The Function Key status screen
appears with a listing of all the functions. See Figure 4-1. To perform a desired
function, highlight the function using the up and down arrow keys and then press the
Execute soft key.
Function keys are momentary. If you want the associated outputs to be maintained,
use a latching function when you design logic in the Zeus programming tool.
Menu:Function Keys
FireFinder@1
F1 Function Key@address 253:1
F2 Function Key@address 253:2
F3 Function Key@address 253:3
Cancel Page Up
Figure 4-1
Selecting Function Keys
Use the logout feature to leave the password protected area. Press the Logout soft
key to log out of Control mode. The Logout label grays out and the green LED turns
off to indicate that logout is completed. See Figure 4-2.
The PMI will automatically logout the user after five minutes of inactivity.
Page Down Execute

OTHER MODES

4-1