Setting the KP8 and KP8F
6.7 KP8F – Configure Shared Device
7. If there are several Shared Device connections, you must select a device for full access.
8. Select the required device for the access type "Full".
9. Click "OK".
10. Select the "Access" tab.
11. Select the Shared Device connection for which you want to change the access.
12. Select the required parameter.
13. Click "OK".
Result
Shared Device is configured for the KP8F.
70
The following dialog appears:
The entry is saved. The dialog box closes.
The following dialog appears:
Parameter
Full
. . .
The entry is saved. The dialog box closes.
Meaning
Read and write access by the controller
No access by the controller
Operating Instructions, 10/2010, A5E03284305-01
KP8, KP8F