Rear Operator Controls And Displays - Siemens SIMATIC KP8 Operating Instructions Manual

Operator controls and displays

5.2 Rear operator controls and displays

The following figure shows the numbering of the LEDs:
Utilization of the buttons occurs via the process image. Refer to chapter "Bit assignment in
the process image (Page 91) ".
5.2 Rear operator controls and displays
On the rear of the KP8 and the KP8F, you will find the following operator elements and
displays. The DIL switch is only available on the KP8F.
54
Operating Instructions, 10/2010, A5E03284305-01
KP8, KP8F