Connecting the cables
Pay attention to the following when connecting the lines:
● Do not bend contact pins
● The connector is coded to prevent faulty insertion
The setting of the interfaces is described in Chapter "Technical specifications (Page 83)".
4.4.2
Ports
The following figure below shows the interfaces of the KP8:
In contrast to the KP8, the KP8F has a 16-pin socket for the digital input/output and for
connection to the power supply. For a description of the interfaces, refer to chapter "Interface
description (Page 89)".
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
Mount and connect KP8 and KP8F
4.4 Connecting the HMI device
43