Step.3:.Make.the.port.settings.for.the.software.rip; Step 3: Make The Port Settings For The Software Rip - Roland TrueVIS VG2-640 Setup Manual

3. Network Settings
Repeat steps
E
For the value to enter for your gateway address, consult your network administrator. Here,
"255.255.255.255" is entered by way of example.
GATEWAY ADDR.
255.255.255.255
When you have finished making the setting, press [ENTER].
F
Press [MENU] to go back to the original screen.
G

Step 3: Make the Port Settings for the Software RIP

The settings for the software RIP will be made here. For settings information, refer to the documen-
tation for the software RIP.
Confirming that a network connection has been established
Refer to the documentation for the software RIP you are using.
60
2.Installation
C D
and to set [GATEWAY ADDR.] to "255.255.255.255."