Roland TrueVIS VG2-640 Setup Manual page 31

Lightly tighten the bolts in the order of
G
Fully tighten the bolts in the order of
H
Before tightening the bolts, check once more that the 2 stand legs are parallel. If the inside of
the stand stay is touching the L-shaped brackets and the stand legs, the stand legs will be paral-
lel.
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
1 2
, .
1 2
, .
1. Assembly and Ink Filling
Tighten
temporarily
Bolts (short): 6
Tighten fully
Bolts (short): 6
2.Installation
29