Roland TrueVIS VG2-640 Setup Manual page 35

Fully tighten the bolts (long) in the order of
C
Tighten the bolts (long) securely. Loose bolts (long) may cause the stand to wobble.
Remove the lifting bars.
D
1 Loosen the lifting bar fixing bolts (4 locations in total) on the bottom surface of the
printer unit.
2 Remove the lifting bars by sliding them to the back of the printer unit.
1. Assembly and Ink Filling
1 2
, .
Tighten fully
Bolts (long): 8
Washers: 8
33
2.Installation