Roland TrueVIS VG2-640 Setup Manual page 50

1. Assembly and Ink Filling
Make sure the drain bottle is installed, and then press [ENTER].
C

P. 40 "Step 4: Installing the Drain Bottle"
INSTALL
DRAIN BOTTLE
The screen shown below appears, and then the machine starts the preparations for the ink fill-
ing. The (approximate) remaining time for the procedure is displayed on the screen. (The display
shown below is an example. "20:00" = "20 minutes and 00 seconds")
FILLING INK...
>>>>>
ME MO
If the screen shown below appears here, pouch trays remain in the ink slots. Remove all the
pouch trays.
REMOVE CARTRIDGE
12345678
2.
Fill the machine with ink and TR2 cleaning liquid.
Set the ink pouch for each color and the TR2 cleaning liquid pouch in the pouch trays.
A
Gently shake the ink pouch for each color. Shake the white ink pouch and the orange
B
ink pouch 50 times (for around 20 seconds).
The precipitation of the ingredients in the ink disables printing in normal color. So that the ink
mixes well, shake the pouch tray horizontally with a stroke length of around 5 cm (2 in.) from
each end of the tray.
48
2.Installation
20:00
Check that the hook has caught.
Hook