Roland TrueVIS VG2-640 Setup Manual page 33

Attach the lifting bars to the temporarily tightened lifting bar fixing bolts.
B
After passing the lifting bar fixing bolts through the holes, slide the lifting bars to the front so
that they do not fall off.
Fully tighten the lifting bar fixing bolts (4 locations in total).
C
Tighten the lifting bar fixing bolts securely. Loose lifting bar fixing bolts may lead to accidents
when the printer unit is moved.
P oin t
You can view the inside of the lifting bars from the top holes. Carry out the work while checking the
positions and tightening status of the bolts.
1. Assembly and Ink Filling
Tighten fully
Lifting bar fixing
bolts: 4
2.Installation
31