Esc P - Set Font To 16 Cpi - TransAct Epic Edge Oem Integration Manual

8-Printer Commands
ESC P – Set Font to 16 cpi
Description
Changes the character size for subsequent characters to the 16 cpi mini font.
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC * command)
or another font is selected.
See also
ESC M – Set Font to 12 cpi
ESC S – Set Font to 20 cpi
ESC U – Set Font to 10 cpi
ESC T – Set Font to 7 cpi
Expression
ASCII [ESC] P
Hexadecimal 1BH 50H
Decimal <27> <80>
Parameters None
Comparison table of font sizes
Font
ESC S - mini
ESC P - mini
ESC M – normal (default) 32
ESC U - headline
ESC T - headline
100-14444 Rev B
Height Width
(dots) (dots)
24 10
24 12
16
32 20
56 28
August 2018
Epic Edge™ OEM Integration Manual
Horizontal Vertical cpi
cpi
20.0 8.4
16.9 8.4
12.7 6.4
10.2 6.4
7.3 3.6
Page 93