Esc M - Set Font To 12 Cpi - TransAct Epic Edge Oem Integration Manual

8-Printer Commands
ESC M – Set Font to 12 cpi
Description
Changes the character size for subsequent characters to the 12 cpi normal font. This is
the default font.
Fonts may only be changed at the beginning of a line, prior to any printable characters.
This font will remain in effect until the printer is reset (by the ESC @ or ESC * command)
or another font is selected.
See also
ESC P – Set Font to 16 cpi
ESC S – Set Font to 20 cpi
ESC U – Set Font to 10 cpi
ESC T – Set Font to 7 cpi
Expression
ASCII [ESC] M
1BH 4DH
Hexadecimal
Decimal <27> <77>
Parameters None
Comparison table of font sizes
Font
ESC S - mini
ESC P - mini
ESC M – normal (default) 32
ESC U - headline
ESC T - headline
Page 92
Height Width
(dots) (dots)
24 10
24 12
16
32 20
56 28
August 2018
Epic Edge™ OEM Integration Manual
Horizontal Vertical cpi
cpi
20.0 8.4
16.9 8.4
12.7 6.4
10.2 6.4
7.3 3.6
100-14444 Rev B