Esc G - Turn Double-Strike Mode On/Off - TransAct Epic Edge Oem Integration Manual

8-Printer Commands
ESC G – Turn Double-strike Mode On/Off
This command turns double-strike mode on or off. When the least significant bit (LSB) of
the parameter n is 0, double-strike mode is turned off. When the LSB is 1, double-strike
mode is turned on.
Expression
ASCII ESC G <n>
Hexadecimal 1BH 47H <n>
Decimal <27> <71> <n>
Parameters n = value ranging from 0 to 255, where:
Page 90
LSB = 0 turns off double-strike mode
LSB = 1 turns on double-strike mode
August 2018
Epic Edge™ OEM Integration Manual
100-14444 Rev B