Gs B - Extract Barcode Data - TransAct Epic Edge Oem Integration Manual

9-Transact Template Language
GS B – Extract Barcode Data
Description
This command extracts data saved in other data buffers by the GS C Enter Data
command and enters in into data buffer 14 in order to create a 15-digit secondary
barcode number. Data is extracted as follows:
•
5 digits from Field Number 12 "Machine Number"
•
8 digits from Field Number 10 "Numeric Amount"
•
2 digits from Field Number 13 "First Barcode Number"
In each case, only numeric digits "0" through "9" will be extracted. If fewer than the
specified number of numeric digits are found, that part of the number will be padded with
leading "0"s.
Expression
ASCII [GS] B n
Hexadecimal 1DH 42H n
Decimal <29> <66> n
Parameters None
Page 162
Epic Edge™ OEM Integration Manual
August 2018 100-14444 Rev B