Received Call Log; D Distress Message; D Other Messages; Transmitted Call Log - Icom GM800 Instruction Manual

7
DSC OPERATION
■ Received Call lfg
The transceiver automatically stores up to 50 distress
messages and 50 other messages, and they can be
used as a supplement to your logbook.
Inffrratifn
L
Sfftware key functifns in the RECIEVED CALL
LOG screen:
[Exit]: Push to return to the Main screen.
[Back]: Push to return to the previous screen.
[Print]: Push to print out the selected message when a
printer is connected to the transceiver.
[Enter]: Push to go to the next screen.
[Delete]: Push to delete the selected message.
D Distress ressage
1. Push [DSC Log]
CALL LOG screen.
2. Select "Distress," then push [ENT].
3. Select your desired item.
4. Rotate [CH/GRP] to confirm the message
contents.
5. Push [Standby Mode]
Standby mode.
■ Transritted Call lfg
The transceiver automatically stores up to
50 transmitted calls, and the logs can be used as a
supplement to your logbook.
1. Push [MENU].
2. Select "Transmitted Call Log."
(DSC Log > Transritted Call Lfg)
69
to display the RECIEVED
Rotate
CH/GRP
+
Push
to return to the
Rotate
CH/GRP
+
Push
NOTE:
• When there is an unread DSC message, "
the information area of the LCD.
• The Distress messages are stored in "Distress."
• " " is displayed when there are unread DSC
messages.
• " " is displayed when there are no unread DSC
messages.
• No icon is displayed when there are no DSC messages.
D Other ressages
1. Push [DSC Log]
LOG screen.
2. Select "Others," then push [ENT].
3. Select your desired item.
4. Rotate [CH/GRP] to confirm the message
contents.
5. Push [Standby Mode]
Standby mode.
Inffrratifn
L
Sfftware key functifns in the TRANSMITTED
CALL LOG screen:
[Exit]: Push to return to the Main screen.
[Back]: Push to return to the previous screen.
[Print]: Push to print out the selected message when
a printer is connected to the transceiver.
[Enter]: Push to go to the next screen.
[Delete]: Push to delete the selected message.
3. Select your desired item.
4. Rotate [CH/GRP] to confirm the message
contents.
5. Push [Standby Mode]
Standby mode.
" blinks on
to display the RCVD CALL
Rotate
CH/GRP
+
Push
to return to the
Rotate
CH/GRP
+
Push
to return to the