Transmitted Call Log - Icom iM323 Instruction Manual

7
DSC OPERATION
Receiving a Test Acknowledgement Call
D
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
➥
"RCVD TEST ACK" pops up. The backlight blinks for 2 min-
➥
utes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
[EXIT]
Push to return to the normal operating mode.
➥
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
60

Transmitted Call log

■
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter "TX CALL LOG" in the DSC CALLS menu.
q
➪ DSC Calls ➪ Transmitted Call Log
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
• Push [BACK] to return to the previous screen.
• Push [EXIT] to return to the normal operating mode.
Push [ Y]/[Z] to select the desired item, then push [ENT].
w
Rotate Dial to scroll the DSC message contents.
e
To delete the displayed DSC message, push [DEL].
r
• The conirmation screen appears, then push [OK] to delete.
Push [EXIT] to return to the normal operating mode.
t
Rotate