Scrapping And Elimination - FERRI TR Series Maintenance And Use Manual

Rev. 01.00

9 SCRAPPING AND ELIMINATION

If the machine is to be scrapped, it must be disposed of in suitable waste disposal site, complying with the legislation in force.
If the machine has been put out of commission, the parts that are likely to cause any danger must be rendered harmless.
Recover any old oil and dispose of it in special oil disposal centres.
Before scrapping the machine it is necessary to separate plastic or rubber parts, electric and electronic material.
The materials that make up the machine that must be separated are:
■
steel
■
mineral oil
■
rubber
■
plastic
■
electrical system wires
The parts composed only of plastic, aluminium or steel may be recycled, if consigned to recycling centres.
SCRAPPING AND ELIMINATION
TR-TRM
49