Conservation - FERRI TR Series Maintenance And Use Manual

GENERAL INFORMATION

1.1.2 Conservation

The use and maintenance manual must be kept close to the machine and away from liquids and any other substance which
could cause it to become illegible.
This manual, together with the declaration of conformity, must be considered an integral part of the machine supplied by FERRI
srl and it must accompany the machine until it is demolished. If it is not delivered with the machine or if it is lost, you must apply
to FERRI srl for a new copy, which will be sent to you in the shortest time possible. This manual contains regulations for use, ordinary
maintenance, extraordinary maintenance and troubleshooting for the machine produced by FERRI srl.
1.1.3 Information on the machine
The materials used by FERRI srl to construct the machine have been selected according to the specific use for which the ma-
chine has been designed and made (see par. 2.1.1): any substantially different uses may cause harm to persons and things
and may be detrimental to the good operation of the machine. The respect of and strict conformity with the conditions of use,
repair and maintenance, as specified below in this manual, are essential elements which form part of the intended use. The use
of the machine for activities not contemplated in the design stage and not listed in this manual relieves FERRI srl of all direct or
indirect responsibility. Any arbitrary modification made to this machine relieves FERRI srl of all responsibility for damage or injuries,
even of a serious nature, which may occur to the operators, to third parties and to things. Correct use of the machine, scrupulous
observation of the rules listed here and the strict application of all the precautions to prevent any situations of danger, will avoid
the risk of accident or injury, while allowing the machine to work better and longer and reducing breakdowns to a minimum.
FERRI srl declines all objective responsibility if the rules referred to in the machine are not
applied and respected.
CAUTION
If you have any question npt answered in this manual or require additional copies or the manual is damaged, please contact
your Dealer or
FERRI srl, Via C.Govoni, 30 - 44030 Tamara (Fe) - Italia.
Tel. +39 0532 - 866.866
Fax. +39 0532 - 866.851
e-mail: info@ferrisrl.it
1.2 Machine identification
On the frame of each machine there is an identity plate (Fig.1.1) showing the CE stamp, the dates of Manufacturer, the series num-
ber, the construction year, the machine weight, the transmission power and the maximum hydraulic pressure of the machine.
FIG. 1.1
The data given on the identification plate are indispensable whenever asking for spare par-
ts.
CAUTION
10
TR-TRM
Rev. 01.00