Rev. 01.00
8 EXTRAORDINARY MAINTENANCE
Before carrying out any work, it is mandatory to:
■
Lower the cutter bar to the ground
■
Turn off the engine and take the starting key out
Clean the inside of the casing and remove deposits of dust and detritus.
8.1 Pipe replacement
Any intervention or maintenance on the hydraulic system has to be carried out by duly edu-
cated personnel.
WARNING
■
Before working on the hydraulic system, exhaust all pressure, working with the engine off and using all control levers.
■
Pay particular attention to cleanliness as dirt and dust can cause a great deal of damage to the hydraulic system.
■
Replace any damaged pipes with genuine spare parts, or with others of the same specification; ensure that they are not kinked
or twisted – remembering to check this throughout the entire cycle of arm movement.
Every day, check the state of wear of the hydraulic pipes, changing them if they become
abraded or cracked.
WARNING
Change the hydraulic pipes at least every 6 years.
WARNING
EXTRAORDINARY MAINTENANCE
Use safety footwear, overalls and safety gloves.
TR-TRM
47