13 - Technical Specifications; Specifications; Flow Ranges For The Flow Transducers; Baud Rate - Hardi HC5500 Instruction Book

Specifications

Specifications
Supply voltage:
Controlled shutdown "low battery":
Maximum supply:
Maximum peak:
Ambient temperature:
Memory:
Digital transducers (option 2, 3 and 4):
Frequency:
Trigger high:
Trigger low:
Analog transducers (option 1)
Supply:
Input:
Minimum speed for volume regulation

Flow ranges for the flow transducers

Housing Housing identification (A)
S/67 One outside groove
S/67 No groove
S/67 Two outside grooves

Baud rate

The Controller is capable of running the following baud rates when transmitting data to an external component via the
RS232 connectors:
19200 baud
9600 baud (HC 5500 default)
4800 baud
2400 baud
1200 baud
12 Volt DC
9 Volt DC
16 Volt DC
28 Volt DC
23°F to 158°F (– 5°C to + 70°C)
Flash PROM non-volatile
Square signal
0.5 Hz to 2 kHz
4.0 to 12.0 Volt DC
0.0 to 2.0 Volt DC
12 V
4 to 20 mA
0.3 mph (0.5 km/h)
Flow range Orifice PPU
g/min mm value
2 - 30 13.5 485.00
4 - 70 20.0 225.00
20 - 160 36.0 475.00

13 - Technical specifications

13.1