Cutter Unit; Cut Position - Toshiba B-SX600 SERIES Owner's Manual

1.4 Cutter Unit

This section describes the model with the Cutter Unit.
The model with the Cutter Unit is designed to cut the printed media.
A cutter is located inside the Media Outlet.

1.4.1 Cut position

A cut position varies depending on media feed mode selected.
• Strict feed mode
In the Strict feed mode, the cut position is at the
centre of a gap, a notch or a black mark.
• Easy feed mode
In the Easy feed mode, the cut position is
approximately 1 mm from the leading edge of the
label positioned behind the cutter.
• Fixed length feed mode
In the Fixed Length feed mode, the media is cut
at equal interval of media pitch specified in the
printer driver.
Cut position
Cut position
Media pitch specified in
the printer driver
Feed direction
1- 9
1. PRODUCT OVERVIEW
Feed direction
Cut position