Configuring The Web-Based Authentication Parameters; Configuring A Web Authentication Local Banner - Cisco Catalyst 2960-XR Security Configuration Manual
Ios release 15.0 2 ex1
Hide thumbs
Also See for Catalyst 2960-XR:
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring Web-Based Authentication
Configuring the Web-Based Authentication Parameters
Beginning in privileged EXEC mode, follow these steps to configure the maximum number of failed login
attempts before the client is placed in a watch list for a waiting period:
SUMMARY STEPS
1. configure terminal
2. ip admission max-login-attempts number
3. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
ip admission max-login-attempts number
Example:
Switch(config)# ip admission max-login-attempts
10
Step 3
end
Example:
Switch(config)# end
Configuring a Web Authentication Local Banner
Beginning in privileged EXEC mode, follow these steps to configure a local banner on a switch that has web
authentication configured.
SUMMARY STEPS
1. configure terminal
2. ip admission auth-proxy-banner http [banner-text | file-path]
3. end
OL-29434-01
Purpose
Enters the global configuration mode.
Set sthe maximum number of failed login attempts. The
range is 1 to 2147483647 attempts. The default is 5.
Returns to privileged EXEC mode.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
Configuring the Web-Based Authentication Parameters
321
Advertisement
Table of Contents
