Cisco Catalyst 2960-XR Security Configuration Manual page 185

Ios release 15.0 2 ex1

Hide thumbs Also See for Catalyst 2960-XR:

Table of Contents

Configuring IPv6 ACLs

This is an example of the output from the show ipv6 access-list privileged EXEC command. The output

shows only IPv6 access lists configured on the switch or switch stack

Switch# show ipv6 access-list

IPv6 access list inbound

permit tcp any any eq bgp (8 matches) sequence 10

permit tcp any any eq telnet (15 matches) sequence 20

permit udp any any sequence 30

IPv6 access list outbound

deny udp any any sequence 10

deny tcp any any eq telnet sequence 20

Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1

Monitoring IPv6 ACLs