Configuring Vlan Id-Based Mac Authentication - Cisco Catalyst 2960-XR Security Configuration Manual

Configuring IEEE 802.1x Port-Based Authentication
Command or Action
Step 10
radius-server vsa send authentication
Example:
Switch(config)# radius-server vsa send
authentication
Step 11
end
Example:
Switch(config)# end

Configuring VLAN ID-based MAC Authentication

Beginning in privileged EXEC mode, follow these steps:
SUMMARY STEPS
1. configure terminal
2. mab request format attribute 32 vlan access-vlan
3. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 mab request format attribute 32 vlan access-vlan
Example:
Switch(config)# mab request format attribute 32 vlan
access-vlan
OL-29434-01
Purpose
• use-svi—Uses the switch virtual interface (SVI) IP address as
source of ARP probes.
Configures the network access server to recognize and use
vendor-specific attributes.
Note The downloadable ACL must be
operational.
Returns to privileged EXEC mode.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
Configuring VLAN ID-based MAC Authentication
Purpose
Enters global configuration mode.
Enables VLAN ID-based MAC authentication.
293