Cisco Catalyst 2960-XR Security Configuration Manual page 354

Configuring a Protected Port
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/1
Step 3 switchport protected
Example:
Switch(config-if)# switchport protected
Step 4
end
Example:
Switch(config-if)# end
Step 5 show interfaces interface-id switchport
Example:
Switch# show interfaces gigabitethernet1/0/1
switchport
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
332
Configuring Port-Based Traffic Control
Purpose
Enters global configuration mode.
Specifies the interface to be configured, and enter
interface configuration mode.
Configures the interface to be a protected port.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration
file.
OL-29434-01