Cisco Catalyst 2960-XR Security Configuration Manual page 393
Ios release 15.0 2 ex1
Hide thumbs
Also See for Catalyst 2960-XR:
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring IPv6 First Hop Security
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
interface Interface_type stack/module/port
Example:
Switch(config)# interface gigabitethernet 1/1/4
Step 3
ipv6 source-guard attach-policy policy_name
Example:
Switch(config-if)# ipv6 source-guard
attach-policy example_policy
Step 4
do show running-config
Example:
Switch#(config-if)#
OL-29434-01
do show running-config
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
How to Attach an IPv6 Source Guard Policy to an Interface
Purpose
Enters the global configuration mode.
Specifies an interface type and identifier; enters the
interface configuration mode.
Attaches the IPv6 Source Guard policy to the interface.
The default policy is attached if the attach-policy option
is not used.
Confirms that the policy is attached to the specified
interface without exiting the configuration mode.
371
Advertisement
Table of Contents
