Configuring IEEE 802.1x Port-Based Authentication
Command or Action
Step 6
authentication host-mode [multi-auth | multi-domain |
multi-host | single-host]
Example:
Switch(config-if)# authentication host-mode
multi-auth
Step 7
authentication open
Example:
Switch(config-if)# authentication open
Step 8
authentication order [ dot1x | mab ] | {webauth}
Example:
Switch(config-if)# authentication order dot1x
webauth
Step 9
authentication periodic
Example:
Switch(config-if)# authentication periodic
Step 10
authentication port-control {auto | force-authorized |
force-un authorized}
Example:
Switch(config-if)# authentication port-control auto
Step 11
end
Example:
Switch(config-if)# end
Related Topics
Open1x Authentication, on page 239
Disabling 802.1x Authentication on the Port
You can disable 802.1x authentication on the port by using the no dot1x pae interface configuration command.
OL-29434-01
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
Disabling 802.1x Authentication on the Port
Purpose
(Optional) Sets the authorization manager mode on a
port.
(Optional) Enables or disable open access on a port.
(Optional) Sets the order of authentication methods
used on a port.
(Optional) Enables or disable reauthentication on a
port.
(Optional) Enables manual control of the port
authorization state.
Returns to privileged EXEC mode.
297