Local Web Authentication Banner - Cisco Catalyst 2960-XR Security Configuration Manual

Local Web Authentication Banner

Local Web Authentication Banner
With Web Authentication, you can create a default and customized web-browser banners that appears when
you log in to a switch.
The banner appears on both the login page and the authentication-result pop-up pages. The default banner
messages are as follows:
• Authentication Successful
• Authentication Failed
• Authentication Expired
The Local Web Authentication Banner can be configured in legacy and new-style (Session-aware) CLIs as
follows:
• Legacy mode—Use the ip admission auth-proxy-banner http global configuration command.
• New-style mode—Use the parameter-map type webauth global bannerglobal configuration command.
The default banner Cisco Systems and Switch host-name Authentication appear on the Login Page. Cisco
Systems appears on the authentication result pop-up page.
Figure 23: Authentication Successful Banner
The banner can be customized as follows:
• Add a message, such as switch, router, or company name to the banner:
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
304
◦Legacy mode—Use the ip admission auth-proxy-banner http banner-textglobal configuration
command.
◦New-style mode—Use the parameter-map type webauth global bannerglobal configuration
command
Configuring Web-Based Authentication
OL-29434-01