Monitoring Port Security - Cisco Catalyst 2960-XR Security Configuration Manual

Monitoring Port Security

Command or Action
Step 5
show port-security [interface interface-id]
[address]
Example:
Switch# show port-security interface
gigabitethernet1/0/1
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Port Security Aging, on page 338
Monitoring Port Security
This table displays port security information.
Table 36: Commands for Displaying Port Security Status and Configuration
Command
show port-security [interface interface-id]
show port-security [interface interface-id]
address
show port-security interface interface-id
vlan
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
346
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Displays port security settings for the switch or for the
specified interface, including the maximum allowed number
of secure MAC addresses for each interface, the number of
secure MAC addresses on the interface, the number of
security violations that have occurred, and the violation
mode.
Displays all secure MAC addresses configured on all switch
interfaces or on a specified interface with aging information
for each address.
Displays the number of secure MAC addresses configured
per VLAN on the specified interface.
Configuring Port-Based Traffic Control
OL-29434-01