Configuration Examples For Acls; Examples: Using Time Ranges With Acls - Cisco Catalyst 2960-XR Security Configuration Manual

Configuration Examples for ACLs

Table 15: Commands for Displaying Access Lists and Access Groups
show access-lists [number | name]
show ip access-lists [number | name]
show ip interface interface-id
show running-config [interface
interface-id]
show mac access-group [interface
interface-id]
You can also monitor VLAN maps by displaying information about VLAN access maps or VLAN filters.
Use the privileged EXEC commands in this table to display VLAN map information.
Table 16: Commands for Displaying VLAN Map Information
show vlan access-map [mapname]
show vlan filter [access-map name | vlan vlan-id]
Configuration Examples for ACLs

Examples: Using Time Ranges with ACLs

This example shows how to verify after you configure time ranges for workhours and to configure January
1, 2006, as a company holiday.
Switch# show time-range
time-range entry: new_year_day_2003 (inactive)
absolute start 00:00 01 January 2006 end 23:59 01 January 2006
time-range entry: workhours (inactive)
periodic weekdays 8:00 to 12:00
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
140
Displays the contents of one or all current IP and MAC address
access lists or a specific access list (numbered or named).
Displays the contents of all current IP access lists or a specific
IP access list (numbered or named).
Displays detailed configuration and status of an interface. If IP
is enabled on the interface and ACLs have been applied by using
the ip access-group interface configuration command, the access
groups are included in the display.
Displays the contents of the configuration file for the switch or
the specified interface, including all configured MAC and IP
access lists and which access groups are applied to an interface.
Displays MAC access lists applied to all Layer 2 interfaces or
the specified
Layer 2 interface.
Displays information about all VLAN access maps or
the specified access map.
Displays information about all VLAN filters or about
a specified VLAN or VLAN access map.
Configuring IPv4 ACLs
OL-29434-01