Configuring The Web-Based Authentication Parameters - Cisco 3032 Software Configuration Manual

Configuring Web-Based Authentication
This example shows how to apply an AAA failure policy:
Switch(config)# ip admission name AAA_FAIL_POLICY proxy http event timeout aaa policy
identity GLOBAL_POLICY1
This example shows how to determine whether any connected hosts are in the AAA Down state:
Switch# show ip admission cache
Authentication Proxy Cache
Client IP 209.165.201.11 Port 0, timeout 60, state ESTAB (AAA Down)
This example shows how to view detailed information about a particular session based on the host IP
address:
Switch# show ip admission cache 209.165.201.11
Address
MAC Address
Interface
Port
Timeout
Age
State
AAA Down policy

Configuring the Web-Based Authentication Parameters

You can configure the maximum number of failed login attempts before the client is placed in a watch
list for a waiting period.
Command
Step 1 ip admission max-login-attempts number
Step 2 end
Step 3
show ip admission configuration
Step 4 show ip admission cache
Step 5 copy running-config startup-config
This example shows how to set the maximum number of failed login attempts to 10:
Switch(config)# ip admission max-login-attempts 10
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
10-16
: 209.165.201.11
: 0000.0000.0000
: Vlan333
: 3999
: 60
: 1
: AAA Down
: AAA_FAIL_POLICY
Purpose
Set the maximum number of failed login attempts. The
range is 1 to 2147483647 attempts. The default is 5.
Returns to privileged EXEC mode.
Display the authentication proxy configuration.
Display the list of authentication entries.
(Optional) Save your entries in the configuration file.
Chapter 10 Configuring Web-Based Authentication
OL-12247-04