Scpi.calculate(Ch).Selected.marker(Mk).Function.type - Planar R54 Programming Manual

Vector reflectometer; programming com/dcom
Table of Contents

Advertisement

PLANAR R54x2

SCPI.CALCulate(Ch).SELected.MARKer(Mk).FUNCtion.TYPE

Object Type
Data Type
Target
Description
Range
Notes
Out of Range
Preset Value
Syntax
Equivalent Softkeys
Property (read/write)
String
Marker Mk of the active trace of channel Ch,
Ch:
channel number 1–4 (see Table 1 on page 22)
Mk:
marker number 1–15, or reference marker number 16 (see
Table 4 on page 61)
The selection of the type of the marker search, which is performed by the
SCPI.CALCulate(Ch).SELected.MARKer(Mk).FUNCtion.EXECute
"MAXimum"
: Maximum value search
"MINimum"
: Minimum value search
"PEAK"
: Peak search
"LPEak"
: Peak search to the left from the marker
"RPEak"
: Peak search to the right from the marker
"TARGet"
: Target search
"LTARget"
: Target search to the left from the marker
"RTARget"
: Target search to the right from the marker
The short format of the parameter is indicated by upper case letters. There is
no distinction between upper and lower case letters when the property is
written. When the property is read out, the short format is indicated by upper
case letters.
The value is ignored.
"MAX"
Dim Param As String
Param = app.SCPI.CALCulate(Ch).SELected.MARKer(Mk).FUNCtion.TYPE
app.SCPI.CALCulate(Ch).SELected.MARKer(Mk).FUNCtion.TYPE = "MIN"
Marker > Search > Maximum | Minimum
Marker > Search > Search Peak > Search Peak | Max Peak | Peak Left | Peak
Right
Marker > Search > Search Target > Search Target | Target Left | Target Right
COM/DCOM Programming manual
method.
85

Advertisement

Table of Contents
loading

Table of Contents