Scpi.sense(Ch).Correction.collect.ckit.stan(Std).Type - Planar R54 Programming Manual

PLANAR R54x2

SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).TYPE

Property (read)
Object Type
String
Data Type
Standard Std of the calibration kit specified for channel Ch,
Target
The type of the calibration standard.
Description
"OPEN"
"SHORt"
Range
"LOAD"
"THRU"
The short format of the parameter is indicated by upper case letters. There is no
distinction between upper and lower case letters when the property is written.
Notes
When the property is read out, the short format is indicated by upper case
letters.
An error occurs. Error code: 216.
Out of Range
Varies depending on the selected calibration kit and the standard.
Preset Value
Dim Param As String
Syntax
Param = app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).TYPE
app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).TYPE = "OPEN"
None
Equivalent Softkeys
Ch: channel number 1–4 (see Table 1 on page 22)
Std: standard number (see Table 7 on page 167)
: Open
: Short
: Load
: Thru
COM/DCOM Programming manual
184