Table of Contents
Advertisement
PLANAR R54x2
SCPI.CALCulate(Ch).SELected.FUNCtion.TTRansition
Object Type
Data Type
Target
Description
Range
Notes
Out of Range
Preset Value
Syntax
Equivalent Softkeys
Property (read/write)
String
The active trace of channel Ch,
Ch:
channel number 1–4 (see Table 1 on page 22)
The transition type selection when performing the search for the trace and
the target level crosspoints by the
SCPI.CALCulate(Ch).SELected.FUNCtion.EXECute
"POSitive"
: Positive peaks
"NEGative"
: Negative peaks
"BOTH"
: Both positive peaks and negative peaks
The short format of the parameter is indicated by upper case letters. There is
no distinction between upper and lower case letters when the property is
written. When the property is read out, the short format is indicated by upper
case letters.
The value is ignored.
"POS"
Dim Param As String
Param = app.SCPI.CALCulate(Ch).SELected.FUNCtion.TTRansition
app.SCPI.CALCulate(Ch).SELected.FUNCtion.TTRansition = "BOTH"
None
COM/DCOM Programming manual
method.
58
Advertisement
Table of Contents
