Scpi.trigger.sequence.source - Planar R54 Programming Manual

PLANAR R54x2
Object Type
Data Type
Target
Description
Range
Notes
Out of Range
Preset Value
Syntax
Related Commands
Equivalent Softkeys

SCPI.TRIGger.SEQuence.SOURce

Property (read/write)
String
Instrument
Selects the sweep trigger source.
"INTernal" : Internal
"BUS" : Bus
The short format of the parameter is indicated by upper case letters. There is
no distinction between upper and lower case letters when the property is
written. When the property is read out, the short format is indicated by upper
case letters.
An error occurs. Error code: 205.
"INT"
Dim Param As String
Param = app.SCPI.TRIGger.SEQuence.SOURce
app.SCPI.TRIGger.SEQuence.SOURce = "BUS"
SCPI.TRIGger.SEQuence.IMMediate
SCPI.TRIGger.SEQuence.SINGle
SCPI.IEEE4882.TRG
None
COM/DCOM Programming manual
219