PLANAR R54x2
SCPI.CALCulate(Ch).SELected.CORRection.OFFSet.PHASe
Object Type
Data Type
Target
Description
Range
Out of Range
Preset Value
Unit
Syntax
Equivalent Softkeys
Property (read/write)
Double
The active trace of channel Ch,
Ch:
channel number 1–4 (see Table 1 on page 22)
The value of the phase offset.
from –360 to 360
Sets the value of the limit, which is closer to the specified value.
0
° (degree)
Dim Value As Double
Value = app.SCPI.CALCulate(Ch).SELected.CORRection.OFFSet.PHASe
app.SCPI.CALCulate(Ch).SELected.CORRection.OFFSet.PHASe = 360
Scale > Phase Offset
COM/DCOM Programming manual
35