Scpi.calculate(Ch).Fsimulator.sended. Zconversion.port(Pt).Z0.R - Planar R54 Programming Manual

PLANAR R54x2

SCPI.CALCulate(Ch).FSIMulator.SENDed. ZCONversion.PORT(Pt).Z0.R

Object Type
Data Type
Target
Description
Range
Out of Range
Preset Value
Unit
Syntax
Equivalent Softkeys
Property (read/write)
Double
Port Pt of channel Ch,
Ch: channel number 1–4 (see Table 1 on page 22)
Pt: port number 1-2 (see Table 2 on page 22)
The value of the impedance for port impedance conversion function.
from 1e–6 to 1e6
Sets the value of the limit, which is closer to the specified value.
50
Ω (Ohm)
Dim Value As Double
Value
app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R
app.SCPI.CALCulate(Ch).FSIMulator.SENDed.ZCONversion.PORT(Pt).Z0.R = 75
Analysis > Fixture Simulator > Port Z0
COM/DCOM Programming manual
=
26