Scpi.sense(Ch).Average.count - Planar R54 Programming Manual

PLANAR R54x2
Object Type
Data Type
Target
Description
Range
Out of Range
Preset Value
Syntax
Equivalent Softkeys

SCPI.SENSe(Ch).AVERage.COUNt

Property (read/write)
Long
Channel Ch,
Ch: channel number 1–4 (see Table 1 on page 22)
The averaging factor, when the averaging function is set to ON by the
SCPI.SENSe(Ch).AVERage.STATe
from 1 to 999
Sets the value of the limit, which is closer to the specified value.
10
Dim Value As Long
Value = app.SCPI.SENSe(Ch).AVERage.COUNt
app.SCPI.SENSe(Ch).AVERage.COUNt = 2
Averaging > Averaging Factor
COM/DCOM Programming manual
property.
161