PLANAR R54x2
Object Type
Data Type
Target
Description
Range
Out of Range
Preset Value
Unit
Syntax
Equivalent Softkeys
SCPI.SENSe(Ch).FREQuency.STARt
Property (read/write)
Double
Channel Ch,
Ch:
channel number 1–4 (see Table 1 on page 22)
The stimulus start value of the sweep range for linear or logarithmic sweep
types.
from 85E6 to 5.4E9
Sets the value of the limit, which is closer to the specified value.
85E6
Hz (Hertz)
Dim Value As Double
Value = app.SCPI.SENSe(Ch).FREQuency.STARt
app.SCPI.SENSe(Ch).FREQuency.STARt = 100Е6
Stimulus > Start Frequency
COM/DCOM Programming manual
200