Scpi.calculate(Ch).Selected.marker.function.domain.stop - Planar R54 Programming Manual

PLANAR R54x2

SCPI.CALCulate(Ch).SELected.MARKer.FUNCtion.DOMain.STOP

Object Type
Data Type
Target
Description
Range
Out of Range
Preset Value
Unit
Syntax
Equivalent Softkeys
Property (read/write)
Double
All traces of channel Ch (if the marker search range coupling is set to OFF
by the
SCPI.CALCulate(Ch).SELected.MARKer.FUNCtion.DOMain.COUPle
property), the active trace of channel Ch (if otherwise),
Ch: channel number 1–4 (see Table 1 on page 22)
The stop value of the marker search range.
From the stimulus current start value to the stimulus current stop value.
No limitation
5.4e9
Hz (Hertz) | s (second) | m (metre) | ft (feet)
Dim Value As Double
Value = app.SCPI.CALCulate(Ch).SELected.MARKer.FUNCtion.DOMain.STOP
app.SCPI.CALCulate(Ch).SELected.MARKer.FUNCtion.DOMain.STOP = 3.1e9
Marker > Search > Search Stop
COM/DCOM Programming manual
78