PLANAR R54x2
Object Type
Data Type
Target
Description
Range
Out of Range
Preset Value
Unit
Syntax
Equivalent Softkeys
SCPI.SENSe(Ch).FREQuency.STOP
Property (read/write)
Double
Channel Ch,
Ch:
channel number 1–4 (see Table 1 on page 22)
The stimulus stop value of the sweep range for linear or logarithmic sweep
types.
from 85E6 to 5.4E9
Sets the value of the limit, which is closer to the specified value.
5.4E9
Hz (Hertz)
Dim Value As Double
Value = app.SCPI.SENSe(Ch).FREQuency.STOP
app.SCPI.SENSe(Ch).FREQuency.STOP = 3Е9
Stimulus > Stop Frequency
COM/DCOM Programming manual
201