Table of Contents
Advertisement
PLANAR R54x2
SCPI.SENSe(Ch).CORRection.COLLect.METHod.RESPonse.THRU
Object Type
Data Type
Target
Description
Range
Out of Range
Syntax
Equivalent Softkeys
Property (write only)
Variant (Long array)
Channel Ch,
Ch:
channel number 1–4 (see Table 1 on page 22)
Selects the ports and sets the response calibration (Thru) type for the
calculation of the calibration coefficients on completion of the calibration
executed by the
SCPI.SENSe(Ch).CORRection.COLLect.SAVE
The array contains 2 elements:
Data(0)
the number of the receiver port;
Data(1)
the number of the source port.
Port number is 1 or 2. Array elements can not contain the same port
numbers.
If an incorrect port number is specified, an error occurs (error code: 222). If
the same port numbers are specified, an error occurs (error code: 220).
app.SCPI.SENSe(Ch).CORRection.COLLect.METHod.RESPonse.THRU = Array(2,
1)
None
COM/DCOM Programming manual
method.
190
Advertisement
Table of Contents
