Scpi.calculate(Ch).Selected.marker(Mk).Activate - Planar R54 Programming Manual

PLANAR R54x2

SCPI.CALCulate(Ch).SELected.MARKer(Mk).ACTivate

Object Type
Target
Description
Syntax
Equivalent Softkeys
Table 4. Mk: Marker Number
Data Type
Description
Range
Out of Range
Notes
Method
Marker Mk of the active trace of channel Ch,
Ch: channel number 1–4 (see Table 1 on page 22)
Mk: marker number 1–15, or reference marker number 16 (see
Table 4 on page 61)
Sets the active marker. If a marker is OFF this function will turn it ON.
Turning ON a marker with the number from 1 to 15 will turn ON all the
markers of smaller numbers. Turning ON the reference marker with number
16 does not turn ON the markers with the numbers from 1 to 15, but
switches these markers to the relative measurement mode.
app.SCPI.CALCulate(Ch).SELected.MARKer(Mk).ACTivate
None
Long
Marker number. Numbers from 1 to 15 are for regular markers, number 16
is for the reference marker.
from 1 to 16
An error occurs. Error code: 203.
If the marker number is not specified, it is taken as equal to 1.
COM/DCOM Programming manual
69