Scpi.calculate(Ch).Parameter(Tr).Select - Planar R54 Programming Manual

PLANAR R54x2

SCPI.CALCulate(Ch).PARameter(Tr).SELect

Object Type
Target
Description
Syntax
Notes
Equivalent Softkeys
Method
Trace Tr of channel Ch,
Ch: channel number 1–4 (see Table 1 on page 22)
Tr: trace number 1–4 (see Table 3 on page 29)
Sets the active channel and trace.
app.SCPI.CALCulate(Ch).PARameter(Tr).SELect
If the channel number is greater than the number of the channels displayed,
an error occurs and the command is ignored. If the trace number is greater
than the number of the traces displayed in the channel, an error occurs and
the command is ignored.
Channels > Active Channel
COM/DCOM Programming manual
31