Installing The Steam Spray Gun - Krautzberger DA3 Operating Instructions Manual

Steam spray gun DA3
6.3

Installing the steam spray gun

Changing the installation position of the steam spray gun
To change the installation position of the steam spray gun, the optional retaining bolt can be
screwed into the control part of the steam spray gun from the other side.
Fig. 2: Installing the steam spray gun
Insert the steam spray gun with the retaining bolt ( Fig. 2/1) into a holder that is provided
on-site by the customer and fasten it properly.
Alternatively, you can use and install an individual adapter, e.g. for a robot.
Article no. ■200-0348
ENGLISH
GB–17