Installing The Automatic Spray Gun - Krautzberger KAA 1300 Operating Instructions Manual

Automatic spray gun KAA 1300
6.3

Installing the automatic spray gun

Fig. 2: Installing the automatic spray gun
1. Install and tighten retaining bolts ( Fig. 2/2) to the automatic spray gun using two screws (
Fig. 2/1).
2. Fastener retaining bolts ( Fig. 2/2) to the automatic spray gun using a suitable customer
provided clamping piece, e.g. a cross, flange or joint clamping piece.
3. Ensure proper grounding of the automatic spray gun.
4. Check the tight fit of all threaded connections.
NOTICE!
If the automatic spray gun is not sufficiently fastened, it can come loose during the
operation, e.g. due to vibration impact. Risk of shifting, e.g. due to repulsion. It is pos-
sible without coating material may exit uncontrollably.
Item number: 200-0201
ENGLISH
GB–19