6.3
Installing the automatic spray gun
Changing the installation position of the automatic spray gun
To change the installation position of the automatic spray gun, the retaining bolt ( Fig. 3/2) can
be screwed into the adapter ( Fig. 3/1) from the other side.
Fig. 3: Installing the automatic spray gun
1.
Fasten the adapter ( Fig. 3/1) with the retaining bolts ( Fig. 3/2) to a suitable construction.
2.
The main element is either plugged in (
screwed on (
GB–18
Operating instructions
Ä Chapter 6.4.2 'Screw-type design' on page 20) depending on the design.
Ä Chapter 6.4.1 'Plugged-in design' on page 19) or
mail@krautzberger.com, www.krautzberger.com
T-Dok-449-GB-Rev.7