Function And Identification; Function; Identification - Krautzberger DA3 Operating Instructions Manual

Steam spray gun DA3

1 Function and identification

1.1

Function

For steam spray guns, the compressed air that is ordinarily required for the atomisation process at
the nozzle is replaced by steam. This process uses a steam generator to generate pressure. The
control of the steam spray gun is still carried out via compressed air, which is generated by com-
pressors.
Steam spray guns are used for the following applications:
n Automatic coating of surfaces
Especially spray fluids such as lacquers, paints, adhesives, glazing, enamel, debonding agents
and other processing aids are used with this technique.
The geometry of the spray jet and the quantity of the spray fluid to be applied can be changed by
adjusting the following factors:
n Selection of the air and fluid nozzle
n Changing the atomising steam pressure
n Changing the spray fluid pressure
n Adjustment of the needle stroke at the control of the steam spray gun (option)
n Changing the round and flat jet
The steam spray gun can be operated both as an independent device as well as in a larger system
(as a component of a fully-automatic coating system as well as a spray robot).
1.2

Identification

Scope of delivery
Serial number
The serial number of the steam spray gun is located on the underside. It serves as a unique identi-
fier.
Article no. ■200-0348
Model
DA3 steam spray gun
Operating manual
ENGLISH
Product number
200-0348
T-Dok-553
GB–5