Table of Contents
Advertisement
NOTICE!
Other than for repair and maintenance purposes, the hand-held spray gun will not be com-
pletely disassembled. For cleaning as well as for material changes, you thoroughly flush it
with a cleaning agent as recommended or stipulated by the supplier of the coating material
until the discharged cleaning product is clean.
Never fully immerse the hand-held spray gun in a cleaning product! There is a risk that seals
will be damaged and lubricants will be washed out.
Do not clean fluid nozzles or the valve seat screw with hard, sharp-hedged objects. A special
flat brush as well as various nozzle cleaning needles made by Krautzberger GmbH are rec-
ommended for cleaning purposes.
In case of prolonged operational interruptions, allow the device to air-dry after flushing it with
cleaning product and store it at a suitable location until it will be used again.
A cloth soaked in cleaning product is recommended for exterior cleaning.
6.3
Maintenance schedule
Interval
Prior to every start-up
After each use
6.4
Clean hand-held spray gun
WARNING!
Risk of injury due to improper cleaning!
–
Adhere to the safety data sheets of the cleaning product manufacturer.
–
Do not fully immerse the hand-held spray gun in a cleaning product.
GB–26
Operating instructions
Maintenance work
Check wear parts
Clean hand-held spray gun
T-Dok-653-GB-Rev.0
mail@krautzberger.com, www.krautzberger.com
Advertisement
Table of Contents
