H3C S3610 Series Operation Manual page 19

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
Table 1-12 Hotkeys reserved by the system
Hotkey
<Ctrl+A>
<Ctrl+B>
<Ctrl+C>
<Ctrl+D>
<Ctrl+E>
<Ctrl+F>
<Ctrl+H>
<Ctrl+K>
<Ctrl+N>
<Ctrl+P>
<Ctrl+R>
<Ctrl+V>
<Ctrl+W>
<Ctrl+X>
<Ctrl+Y>
<Ctrl+Z>
<Ctrl+]>
<Esc+B>
<Esc+D>
<Esc+F>
<Esc+N>
<Esc+P>
<Esc+<>
<Esc+>>
Move the cursor to the beginning of the current line.
Move the cursor one character to the left.
Stop performing a command.
Delete a character.
Move the cursor to the end of the current line.
Move the cursor one character to the right.
Delete the character to the left of the cursor.
Break an outward connection.
Display the next command after history command buffer.
Display the next command before history command buffer.
Redisplay the current line information.
Paste the content in the clipboard.
Delete all the characters in a continuous string to the left of the cursor.
Delete all the characters to the left of the cursor.
Delete all the characters to the right of the cursor.
Return to user view.
Break an inward connection or redirect connection.
Move the cursor to the leading character of the continuous string to
the left.
Delete all the characters of the continuous string to the left of the
cursor.
Move the cursor to the front of the next continuous string to the right.
Move the cursor down by one line (available before press the Enter
key)
Move the cursor up by one line (available before press the Enter key)
Specify the cursor as the beginning of the clipboard.
Specify the cursor as the ending of the clipboard.
1-17
Chapter 1 Basic Configurations
Function