H3C S3610 Series Operation Manual page 31

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
Press Ctrl-B to enter Boot Menu...
Press <Ctrl+B>. The system displays:
Password :
Note:
To enter the Boot Menu, you should press <Ctrl+B> within five seconds after the
information "Press Ctrl-B to enter Boot Menu..." appears. Otherwise, the system starts
to decompress the program; and if you want to enter the Boot Menu at this time, you will
have to restart the switch.
Input the correct BootROM password (no password is need by default). The system
enters the Boot Menu:
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
*************************************************************
*
* H3C S3610-52P BOOTROM, Version 123
*
*************************************************************
Copyright(c) 2004-2006 Hangzhou H3C Technologies Co., Ltd.
Creation date: Aug
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size
Mac Address
BOOT MENU
3 2006, 11:57:55
: 128MB
: 0016e0bee200
3-3
Chapter 3 Device Management
*
*
*